Description

Arduino နှင့်တွဲသုံးရန်အတွက် လိုအပ်သော Example Code အဆင့်သင့်ပါရှိပါသည်။

ယခု combo set တွင် ပါ၀င်သော ပစ္စည်းများမှာ

1. 4 digit 7 segment Display
2. Motion Sensor (PIR)
3. Gas Sensor
4. Color Sensor

This combo set includes 4 modules a.k.a faya nuggets.

1. 4 digit 7 segment Display
2. Motion Sensor (PIR)
3. Gas Sensor
4. Color Sensor

Example code are available to download and ready to use with your Arduino.

1. 4 digit 7 segment Display

Description

• Main Parts
  • Power Jack x 2
  • 4-digit 7-segment Display x 1
  • 3-pin Stackable Header x 1
  • 8-pin Stackable Header x 1
• Display Type : Common cathode
• Segment Input : A, B, C, D, E, F, G, DP
• Scanning Input : 2-to-4 multiplexer with Enable signal
• Brick Unit : 8 x 5

Example Code:

https://github.com/fayalab/faya-nugget/blob/master/ngt_4d7seg/ngt_4d7seg.ino

You can also find example code, schematic and necessary information in this link:

https://www.kandh.com.tw/products_2.php?prod=270&gid=33

 

2. Motion Sensor (PIR)

Description

• Main Parts:
  • Power Jack x 2
  • Motion Sensor x 1
  • Resistor Trimmer x 2
  • 2-pin Stackable Header x 1
• Sensing Wavelength : 5~14 um
• Trimmer Resistance : 2KΩ / 10MΩ
• Note:
  • Use 2KΩ resistor trimmer to adjust input offset
  • Use 10MΩ resistor trimmer to adjust output gain
• Brick Unit : 6 x 5

PIR motion sensor module from faya-nugget series.

Example code : https://github.com/fayalab/faya-nugget/blob/master/MotionSensor_1/MotionSensor_1.ino

 

3. Gas Sensor

Description

• Main Parts :
  • Power Jack x 2
  • Gas Sensor x 1
  • Resistor Trimmer x 1
  • 2-pin Stackable Header x 1
• Sensing Resistance : 10K~60K (5000ppm methane)
• Trimmer Resistance : 100KΩ
• Output : 10%~90%Vcc
• Note : Use resistor trimmer to adjust output voltage
• Brick Unit : 5 x 5

Example code : https://github.com/fayalab/faya-nugget

 

4. Color Sensor

• Main Parts:
  • Power Jack x 2
  • Color Sensor x 1
  • LED x 4
  • 5-pin Stackable Header x 1
  • 2-pin Stackable Header x 1
• LED Type : White LED
• S0, S1 : Frequency scaling selection
• S2, S3 : Photodiode type selection
• OUT : Frequency output
• Note :
  • This module converts light intensity to frequency
  • for color recognition.
• Brick Unit : 6 x 5

Example code : https://github.com/fayalab/faya-nugget/